Recommendations for beginners and professionals: creating a woodshed from a profile pipe

Owners of country houses or cottages, who use a stove or fireplace as heating equipment, know how sometimes It is inconvenient and problematic to store raw materials for heating in cold weather.

To organize and store firewood, special devices called firewood sheds are used.

Reliable and durable design You can make it yourself from a profile pipe.

Firewood shed designs

There are many different types of structures, the most popular of which are the barn and the canopy.

Stationary

The main requirement for the structure is its size. The internal volume of a stationary woodshed should allow storing the entire stock of firewood prepared for the winter period.

It won’t be difficult to make the mentioned structures yourself from a profile pipe.

It will be necessary to carry out three stages of work: lay the foundation, erect the frame, install the roof with walls and, depending on the specific design, partitions.

Portable

They are most often used in the home and are located directly next to the fireplace or stove. They provide convenient storage of a small amount of heating materials. They are mobile and easy to clean, allowing you to keep the area next to the fireplace or stove clean.

In addition to their practical purpose, portable firewood sheds act as decorative elements due to the various variations of their design. Using a profile pipe to make a portable structure, you will get a minimalist design that combines simplicity and practicality.

For the construction you will need not only a profile pipe, but also a sheet of metal (but this is not necessary). The dimensions and design of the device are selected (invented) by each person individually, depending on taste preferences and the design of the room in which the woodshed will be located.

The process of creating a portable woodshed with your own hands

The simplest version of a portable structure is a design that looks like an inverted chair on small legs (10-15 cm).

If desired, you can put a sheet of metal on the bottom, but a design with an empty bottom will be no less functional. In this case, the firewood is placed directly into two parallel pipes.

You can choose the length of the legs and side support posts to suit your taste.

To make a portable woodshed yourself, using a profile cut, it is recommended to use the following algorithm:

• You will need to prepare four pieces of pipe of the same size. These are the ribs of the woodshed, which are located by four points constructions.
• Prepare two smaller pieces. They are located on two opposite sides based on the design.
• Two pieces of pipe of the same length on other opposite sides of the woodshed.
• The last stage is assembly, after which you will get a structure that looks like an inverted rectangular stool without a seat on small legs or without them.
• To connect the elements, it is recommended to use screws and nuts., having previously drilled holes of the required diameter at the connection points of the elements.

How to make from profile pipes

If you need to build a stationary firewood rack yourself from a profile pipe, you can use the following instruction:

1. 

   The first thing you will need to build a woodshed is to draw up a drawing.
2. Once the calculations are completed, you can begin to the direct construction of the structure. First of all, the foundation is laid. The type of foundation used for such structures is columnar.

For each post, you will need to dig a hole. Its depth is determined based on the frost line of the soil. Concrete mixture is poured into each hole and waited for it to harden.

1. After the foundation has been built, they begin to erect the frame., using a profile pipe of the selected section. Metal corners and screws are used for fastening at the joints.
2. For the construction of vertical frame elements it is recommended use a square to align the layout.
3. Recommended all the process of erecting the frame must be carried out in a certain order, starting with the rear pillars, then install the side ones and finally the front ones.
4. The final stage is wall cladding and roof construction. If you want to make a roof at an angle, then the front posts of the frame will need to be made longer. Their length varies depending on the desired angle of the roof. But the best option would be to build a simple rafter system for a pitched roof.
5. Profiled sheets and polycarbonate can be used as materials for walls and roofs. It can be covered with wood. The essence of the process is to attach the selected material to the frame and roof using self-tapping screws.

Photos of buildings

Photo 1. A long woodpile with a frame made of a profile pipe, covered with a tarpaulin on top to protect it from precipitation.

Photo 2. A woodshed made from profiled sections with a rounded roof is installed next to a corrugated fence.

​

Photo 3. A stationary woodpile made of profile pipes with a pitched roof, installed on a summer cottage.

Useful video

The video shows a detailed process of creating a firewood rack from pipes using a welding machine.

Conclusion

To build a woodpile from pipes with your own hands, it is important to decide on the type of structure; it is recommended to first draw it on paper. After creating the drawing and purchasing the necessary materials, it is required study the upcoming process and take into account all the nuances. If you approach the process of building a woodshed with your own hands from a profile pipe correctly, then you can do everything in a few hours.