What will help to quickly heat up the steam room? Rating of cast iron stoves for a bathhouse from Russian manufacturers
Every bathhouse owner strives to equip it the highest quality materials and devices. Particular importance in this matter should be given to the choice of the stove.
Amongst everything variety of metal stoves, you should give preference to cast iron. After all, it is this type of stove that can create the heat inherent Russian or real Finnish sauna.
Content
Main characteristics of cast iron sauna stoves
Cast iron is pretty fragile material, which, at the same time, contains a large amount of carbon, which allows it to be hard. Cast iron difficult to process, so people working with this material cast parts from it rather than cut them out.
It is believed that cast iron stoves that were produced in Russia occupy leading positions in the ranking similar devices.
This is explained by the fact that Russian stoves have preserved the original traditions of cast iron casting, thanks to which it is possible to create the effect of a real Russian bath. The temperature in the ovens can reach 90 °C.
Attention! Furnaces manufactured outside the Russian Federation, for example in Sweden, have very high cost, but the quality of the material is also excellent.
Power
Choosing a device for a bathhouse based on its power, it is necessary to pay attention to the materials that are used not only in the construction of the bathhouse, but also the stove itself.
If the bathhouse is made of brick, it will take longer to heat up, which means you need a stove with more power.
As for cast iron models, their ideal power is determined by using the following formula: 1.5 × the total volume of the steam room.
The result will be an indicator that you can apply when choosing a specific model.
Thermal capacity
A good cast iron stove should have heating power from 15 to 35 kW (ideally 20). Such devices consume little fuel, retain heat for a long time, suitable for rooms of any size.
Material
Despite the fact that steel stoves are in great demand, still, choose for yourself grey cast iron. This material is durable and good to work with.
Availability of additional functions
Often, cast iron stoves are complemented by some useful functions.
- For example, clean combustion system. This means that air will escape through a special opening above the door.
- Stiffening ribs can be positioned vertically.
- Some cast iron units are equipped with a chimney.
- The drawer can be pulled out. If you think that secondary gases remain, the device may be equipped with a system for burning them.
Rating of devices from Russian manufacturers
Among Russian manufacturers there are a number of different models sauna stoves that are the most popular.
Termofor Geyser 2014
This oven is manufactured in 2014 by Termofor. Designed for heating the premises up to 18 cubic meters. Firewood, woodchip briquettes, and flights can be used as fuel. The temperature in the Russian bath mode can reach 80 °C. In Finnish sauna mode from 90 to 100 °C.
There is a possibility of filing dry steam. The furnace is made of two types of steel. These are structural and high-alloy steel with a thickness of from 4 to 3 mm.
In addition, it is covered with heat-resistant enamel. Equipped with a heat exchanger, which means it You cannot heat without water in the system. The stove has several color solutions, which means it will easily fit into the interior of your room.
The company Termofor is located in the Russian Federation. This means that the oven does not require long transportation.
Wall-mounted sauna stove. Equipped with a chimney. Closed-type stove. The firebox volume is about 40 l. There is a flame adjustment function.
There is an ash box. Chimney diameter 12 cm. It is connected to the chimney by means of the upper connection. Weight is about 60 kg. Dimensions 42x90x85 cm. The total mass of stones can reach up to 70 kgThere is a convector casing.
Vesuvius Scythian
The advantage of this stove is that it is developed based on the best developments. Made in Russia. Its can be loaded with a huge amount of stones, put a water tank on it. It can be heated from an adjacent room. Dimensions 560x530x720 mm. Weight of stones 110 kg. Available chimney, the diameter of which 120 mmThe maximum volume of the steam room itself is 14 square meters. Weight of the device without stones 63 kg.
The furnace is made of structural steel with a diameter 8 mm. There is a cast iron bumper-tooth. The firebox door is also made of cast iron. The same applies to the grate. There is convection casingIt holds about 110 kg of stones. The manufacturer guarantees a service life equal to 10 years old.
There are several operating modes:
- Finnish — maximum temperature 110 °C;
- Russian - 90 °C;
- classic - 65 °C;
- Turkish - 40–45 °C.
Heating time from 40 minutes for Turkish bath and up to 80 - for Finnish sauna.
Photo 1. Cast iron sauna stove Vesuvius Skif with a baffle and a firebox door. Has several operating modes.
Vesuvius Hurricane
The Vesuvius Hurricane stove is available in several color and design options. However, the technical characteristics of this stove are absolutely identical. What distinguishes it from other models unique design solutions.
The stones in the sauna stove can heat up to a temperature 400 °C. There is a firebox door. It can be heated from an adjacent room. Height 850 mm, width 540, and the depth 790 mm. Maximum weight of stones used 280 kg. The diameter of the chimney itself 120 mmThe length of the firebox reaches 260 mm. Can heat a room with maximum volume 24 sq. m.
The advantage of this model is that it is assembled of three elements. The firebox itself is hermetically sealed. The temperature that can be achieved in the Finnish sauna mode is 110 °C in 80 minutes. The minimum temperature corresponds to a Turkish steam bath 40 °C and is achieved in 40 minutes.
Termofor Tunguska
The Termofor Tunguska furnace takes its origin in 2013, and is presented to us today in several modifications, which certainly affect its cost. The maximum volume of the heated steam room 24 sq. m.
The bath operates in the Finnish sauna mode. There is a built-in heat exchanger. The length of the log can reach 670 mm. Chimney diameter 120 mm. Weighs 70 kgIts dimensions are 98x42x82 cm. Chimney height 5 m.
There is a steel door from a jet heat exchanger, which is used to heat water in a remote tank.
The oven is designed for intense vaping. It is made only from heat-resistant heat-resistant steel. The manufacturer provides a guarantee 3 years. It promises full metal integrity and seam safety for exactly three years. It can work in Finnish sauna mode.
It has a very attractive external design that will suit a modern bathhouse. a sign of increased reliability, which is achieved due to thermal uniformity.
Thermophore of Vitruvius
Thermophore of Vitruvius - floor sauna stove. Can heat a room with a maximum volume 18 square meters. Uses wood fuel. Equipped with a chimney. There is a built-in ash box. Made of heat-resistant steel. Firebox capacity 65 l.
General parameters: 79 x 69 x 65 cm. The door is made of glass, which allows you to look at the fire. The connection to the chimney is from the top, and its diameter is 14 cm. Weighs 62 kg.
Thermofor Osa
Termofor Osa can heat a room of volume 9 cubic meters. Used in operation mode Russian bath. Firewood and wood chips are used as fuel. The manufacturer offers a guarantee. 3 years. The doors are made of black steel without glass inserts. Made of heat-resistant steel with an admixture of chromium.
Photo 2. Cast iron stove for Russian bath Termofor Osa without glass and steel, burning wood and wood shavings.
The length of the log is maximum 330 mmThe chimney is located in the center and its diameter is 116 mm. Chimney height 5 m. Overall dimensions of the oven: 65x42x60 cm. Weight 31 kgThe central location of the chimney is a plus, as it simplifies the installation process.
Hephaestus pb-01
Hephaestus models have gained their popularity in Russia and in Europe. The plant is located in Belarus. This model belongs to wall-mounted sauna stove. It can heat a record-breaking large volume of space equal to 45 sq. m. Power 18 kW. Equipped with a chimney. Combined fuel is used for the firebox. There is a built-in ash box. The body is completely made of cast iron.
The volume of the body is 72x50x89 cm. Chimney diameter 16 cm. Maximum permissible length of firewood at 65 cm. The weight of such a structure 350 kg.
Attention! This model definitely requires brick lining, therefore, it is advisable to place it in large bath complexes.
These ovens have their own good reviews, and the manufacturer promises to provide them a 10 year guarantee impeccable service.
In addition, the Gefest company offers immediately several options for individual design. You will be able to choose a stove that will suit your steam room.
Photo 3. Cast iron wall-mounted stove Gefest PB-01 with a chimney, built-in ash drawer, runs on combined fuel.
Vesuvius Legend Lux 22
Wall-mounted sauna stove. Can heat a room equal to 24 cubic meters. There is a chimney, the stove type is closed. The thickness of the firebox walls about one and a half centimeters.
Gray cast iron is used. The door is made of glass and allows you to watch the beautifully smoldering flame. Chimney diameter 12 cm. Connection to the chimney is from the top. The dimensions of such a complex are 66x71x92 cm. Weight 129 kg. The manufacturer assures that the stove can withstand the weight of stones equal to 180 kgThe furnace tunnel is 300 mm.
The Vesuvius company is located in the Russian Federation and offers its customers various color solutions for cast iron stoves.
Reference! Remember that over time cast iron loses its color, and your stove will acquire a grayish-black tint.
Thermofor Angara
The Termofor Angara model has appeared on Russian markets in 2012, but is still in high demand. This stove can heat a room of 18 cubic meters. It helps retain humidity at high temperatures. The steam room may get hot. up to 100 °C, and the heat is retained 1–1.5 hours.
Light steam is produced only from stones that have been heated. up to 350 °CIf the heater is open, the maximum temperature of the stones will be 250 °C, which is necessary for light steam in the mode Turkish bath.
There is a casing convector, which will speed up the heating of the air, and a cast iron grate.
Equipped with a remote fuel channel. Glass transparent screen made of heat-resistant material that allows you to monitor combustion.
Some models are made of heat-resistant stainless steel. However, this does not cancel the presence of a cast iron grate. Such a stove, equipped with a heat exchanger, can't drown without water, available in the system.
Self-installation is quite simple, and on the Termofor website you can choose a color scheme that will suit your steam room.
The manufacturer offers its customers three-year warranty.
Karelia ATB
The Karelia cast iron stove is distinguished by its increased power, which is equal to 40 kW. It is used in rooms whose volume does not exceed 30 cubic meters. The stove is equipped with a rectangular water tank. Its volume is about 75 liters. Allows you to create dry steam, which is typical for Finnish saunas.
The manufacturer provides 30 months warranty. Height of the device 1100 mm. Maximum length of logs 56 cm. Total weight of the structure 250 kg. The firebox is made of cast iron. It is heated with wood. The mass of stones that can be laid is equal to 100 kg. Chimney diameter 150 cm. For the oven no separate foundation required.
Photo 4. Cast iron stove Karelia ATB with a rectangular water tank. Creates dry steam, like in a Finnish sauna.
As part of the Karelia line, the manufacturer Petrozavodskmash offers a variety of colors, as well as models that are equipped with additional functions. The price range is quite large, and the difference in the cost of a particular model can be up to 15 thousand rubles The brand that produces these ovens is Petrozavodskmash, is located on the territory of the Russian Federation.
Useful video
Video review of popular models of sauna stoves produced by the Russian company Vesuvius.
Which sauna stove is the best option?
Cast iron is an excellent conductor of heat, which means it can be retained for a long time.
Another significant advantage of such designs is that no need to cover the material with any heat-resistant tiles or paint.
Cast iron stoves are easy to install, which means you can handle the installation of the stove yourself. One of the significant disadvantages is the high cost.
However, it is inherent only to truly high-quality models, or those that are equipped additional functions.
In any case, if you are going to buy a cast iron stove, decide on the following:
- volume of the steam room;
- desired type of sauna;
- cost of construction.
Based on the data received, you will be able to select the ideal unit that will not only fit into your interior, but will also bring you joy for many years.
Comments
But I have already purchased Karelia ATB.
In principle, it is suitable for a 20 sq. m. steam room. And the steam is dry, you can increase the humidity if desired. But...
The instructions say to light the fire with wood. But there will be a problem with wood at the end of winter. I didn't expect such a flow of guests on weekends. There is coal. Question: is it possible to replace wood with coal? Maybe someone tried to light the fire with coal in this stove?