Accessories

A thermostat is a temperature-regulating device that is responsible for control of boiler operation depending on air temperature.

There are thermostats indoor and outdoor (outdoor) Sensors can also be used for the street.

Baxi gas equipment has the ability to connect both indoor and outdoor thermostats and sensors.

Indoor appliances have a greater impact tactfulness (switching on and off) the boiler, and the street ones allow the unit to regulate coolant temperature. The air temperature outside and inside the house is constantly changing, and the thermostat helps increase or decrease gas consumption for heating premises.

To prevent any unexpected interruptions in the operation of the gas boiler, it is necessary to take care about the quality of uninterruptible power supply (UPS) for him.

UPS and voltage stabilizer are devices with different purposes.

UPS, first of all - emergency power supply, and the stabilizer - equalizes tension, smooths out "surges".

In a gas boiler room, oxygen is needed to improve the combustion process. To ensure that air constantly enters the room, it must be regularly ventilated.

And also with the help of ventilation the room is cleared of harmful products, which are formed as a result of the combustion of natural fuels.

In addition, the gas itself also causes poisoning, so for safety reasons the boiler room should be well ventilated. As a result, ventilation for a gas boiler in a private house can solve several problems at once.

Voltage stabilizer is a device that protects an electricity-dependent boiler heating from power surges.

Since the boiler is complex and expensive equipment, network problems can disrupt its operation and completely disable the control board, the repair of which will cost 20-30% from the cost of the device itself.

The stabilizer helps to avoid such expenses due to its main function: maintaining a constant voltage level in the network.

The Russian market offers models of uninterruptible power supplies (UPS) for gas boilers from various manufacturers.

Among them: Resanta (Latvia); Powercom (Taiwan); Sven (Finland, made in China); Leader, Bastion, Energy (Russia).

In the private sector it is not uncommon power surges, and gas boilers are high-precision equipment that is sensitive to the quality of the consumed current.

This issue is resolved by a voltage regulator. In case of unexpected power supply problems, this The device protects the boiler board from damage and extends the service life of the heating system. Stabilizers differ in both design and operating principle, so it is important to know how to choose the right device. Household stabilizers come in three types: electromechanical, thyristor, and relay.

Efficient management of the heating system in a living space helps not only to constantly maintain a comfortable temperature, but also to reduce energy and fuel costs and extend the service life of equipment.

Applications of wireless thermostats allows you to fully automate the process regulation of the gas boiler operation.

For normal operation of a gas boiler, soft water is needed, the supply of which is ensured by installing special filters. Today, there are 3 types of devices: electromagnetic, cartridge and polyphosphate.

The pressure gauge exists for this purpose. to measure the pressure in the system. It is connected to the emergency relief valve and air vent, thus, guaranteeing safety.

Pressure readings outside the permissible limits mean that the system is not working properly. Excessive pressure can lead to a pipeline rupture and even an equipment explosion.

According to statistics every fourth breakdown gas boiler is connected with electrical network problems. Modern boilers are controlled by high-tech electronics, which are quite demanding in terms of power supply.

In the private sector it is not uncommon sudden voltage fluctuations, power surges, which is detrimental to the boiler's electrical circuit boards.

Stabilizer protects equipment in such situations and provides high-quality power supply for the gas boiler. Unlike UPS, the stabilizer only regulates the frequency and voltage of the output current, which allows all systems to operate without overloads. The UPS has built-in power batteries, and in the event of a power outage allows the system to operate autonomously for some time.

Gas burner is a device where oxygen and gas are mixed, this mixture burns and forms a stable flame.

Nozzle – simple design, extremely reliable and efficientThere are several types of devices.

The gas heating boiler is connected to the main highway using a flexible sleeve.

Selecting and installing a boiler hose – a very responsible matter, because we are talking about gas.

An incorrect connection to the gas pipeline may result in explosion.

For supplying domestic gas, flexible gas hoses specially designed for this purpose are used. Using water hoses for this purpose is strictly prohibited.

Temperature sensor for heating boiler - This is a special device that controls the operation of the coolant.

The sensor is used to carry out analysis of the current temperature regime in the room and, if necessary, its correction. This device helps to the maximum increase boiler performance and create a comfortable microclimate in the room.

The modern gas boiler is equipped with various electronic control systems: sensors and an electronic control unit, but for normal operation of the device, a pump for pumping the coolant is also needed.

In case of power outages or power surges A voltage stabilizer or uninterruptible power supply (UPS) would be useful.

A thermostat for a gas boiler is usually installed in residential premises for temperature measurement and boiler control, according to the set heating level.

The room thermostat is designed to regulate the operation of gas equipment, depending on the room temperature (there is no need to constantly adjust the boiler manually).

Based on this, boilers without thermostats will turn on and off depending on the temperature of the water in the heating system.

A thermostat or thermostatic controller is an important component in a heating system. Its main function is comparison of data received from the temperature sensor with the user's individual settings.

This helps to turn the heating on and off in time, achieving the optimal temperature in the room and minimal energy consumption.

A gas filter is a small device that is installed into the gas pipeline for collecting dust and debris and preventing foreign particles from entering the boiler system.

The designs differ in their structure, operating principle, material, and body features. The boiler filter is significantly increases service life unit, prevents blockages, increases safety and reliability.