Systems

A simple and inexpensive way provide warmth in the house - one-pipe system. Heat in the cold season is provided by one highway, this allows you to save on materials.

This type of heating device makes it possible to make heating completely autonomous.

In this case, it is possible to increase efficiency install pump and use it as needed.

Steam heating has lost popularity for the reason high accident risk. These structures are no longer installed in public places.

However, in private homes this heating option is often used. Homeowners prefer to use steam for many reasons. One of them is opportunity to save, having done the installation work yourself.

Heating system is one of the main engineering communications in the house.

The operating principle of heating structures is quite simple: first coolant (usually it's water) is heated in the boiler to the required temperature.

Then he flows through pipes into radiators, which are installed throughout the house.

Thus, the heated coolant gives off heat to the room, after which the cooled water returns back to the boiler, after which the cycle repeats. Depending on the method of delivery There are open and closed heating systems for the coolant.

A heating system with natural circulation of liquid is a closed device of the gravitational (gravity) type, allowing heat the premises in a private house regardless of the power supply.

This design advantage makes it possible to use it in regions with problems or complete absence of a central electrical network. The system economical, but for its proper functioning it will be necessary to make precise calculations.

Scientific and technical progress does not stand still. First of all, this concerns the improvement of living conditions, in particular, heating systems.

A visual result of scientific and technical developments - PLEN heating. This system is fundamentally different from everything that was presented on the market until recently.

Gas boiler as a heat source used everywhere and is considered the optimal means of heating a room.

Natural gas - the most accessible and inexpensive energy source. That is why gas heating is so popular.

Even if there is no possibility of connecting to the main line, it is possible to consider alternative home gasification projects (gas holder, gas cylinders).

Hydraulic tests of the heating system are divided into two categories. Calculation helps to determine the size of communications placed in the building to ensure constant heating.

Cleaning is prescribed when accumulated dirt and rust are detected. This helps restore the original thermal conductivity of pipes if they have become covered with scale during use.

Water heating - technology of heating residential buildings with liquid heat carrierThermal energy is transferred to the room by radiators, pipe registers, and convectors.

For heating the building install registers in each room.

When water heating is operating, the liquid coolant is heated in the heating boiler and flows through pipes into the rooms, where it gives off heat and, already cooled, returns to the boiler, entering a new cycle.

This the process is repeated constantly and heats the rooms.

The main difference open or gravity systems (OS) from closed ones is that in OS the coolant communicates with the surrounding air in an open expansion tank.

The coolant is in the system under atmospheric pressure, there is no excess pressure.

The optimal way to heat a room of any size is considered to be air heating. And although the idea arose many centuries ago, wide application She found it relatively recently.

The operating principle is simple. Preheated air is forced into the desired area. The choice of heat source is varied: gas, electricity, solid fuel. The main advantage of an air system over a water system is the reduction of costs for both its creation and operation.

When heating private houses, a closed heating circuit with forced circulation is mainly used.

The coolant in such a scheme does not evaporate. due to the lack of contact with the environment. This makes it possible use special compounds in addition to water, increasing heating efficiency.

Waste oil is a petroleum product that is formed as a result of the car engine. It is also the most profitable type of fuel for the heating system of a private house.

The structure is being redesigned to save on gas, electricity, etc.

When installing an autonomous heating system with liquefied gas, it is important to know what are the requirements for the installation process and to the equipment itself. It is also necessary to make the calculations correctly.

Skirting board heating is a common heating system today.

It allows to heat the air in the room evenly and quickly.

Skirting board heating appeared in our country relatively recently, but is already gaining popularity.

Central (or district) heating is a system of heat supply a large number of residential properties.

It is most often used for heating multi-apartment buildings, office buildings, and industrial facilities.

Understand essence, structure and principle of operation, and also to understand the types of central heating systems, this article will help.

In the process of designing a heating system, the question arises of how best to connect the radiators - single pipe scheme or according to two-pipe?

Each connection method has its own characteristics, advantages and disadvantages. To choose the wiring diagram correctly, it is necessary to determine its efficiency as it applies to your home. What is the difference between one- and two-pipe systems? And what criteria are used to make a choice?

"Classic" heating systems use gravity and changes in water density to achieve circulation in pipes. In this case, the key parameter of the pipeline system is hydraulic resistance.

The pressure created by the hot water may not be enough to create a stable circulation. This will lead to the formation of steam in the heat source and its failure. The solution to this problem was a pump, added to the circuit before the boiler.